Hardware Digipass Self-Assignment

The following form fields must be used on the Hardware Digipass Self-Assignment page and posted to the User Self-Management Website servlet (action="dpassign"):

Hardware Digipass Self-Assignment form fields
Form field name Visible label Description
username User Name

Required. The user name for logging on to User Self-Management Website. The maximum length is 255 characters.
password Static Password

Required. The password for logging on to User Self-Management Website. The maximum length is 128 characters.
serialno Serial Number Required. The authenticator serial number. The maximum length is 10 characters.
response Digipass Response

Required if Response-Only is used.

The authenticator response (without static PIN if there is one). The maximum length is 16 digits.
newpin New PIN

Required if Response-Only is used and a static PIN is required but is not preset.

The new static PIN. The maximum length is 8 digits.
confirmpin Confirm New PIN

Required if Response-Only is used and a static PIN is required but is not preset.

The confirmation of the new static PIN. The maximum length is 8 digits.
commit Assign Authenticator Required. The button to submit data entered by the user to OneSpan Authentication Server.
replay_token <hidden> Required. Internally used form field to prevent re-transmission of form data.
Hardware Digipass Self-Assignment form fields (Challenge page)
Form field name Visible label Description
username User Name

Required. The user name for logging on to User Self-Management Website. The maximum length is 255 characters.
response Digipass Response

Required. Authenticator response to the challenge. The maximum length is 16 digits.
challengekey <hidden> Required. Internally used form field to facilitate Challenge/Response authentication.
commit Assign Authenticator Required. The button to submit data entered by the user to OneSpan Authentication Server.
replay_token <hidden> Required. Internally used form field to prevent re-transmission of form data.

Hardware Digipass authenticator self-assignment process (Response-Only Digipass authenticator)

  1. The user navigates to the Hardware Digipass Self-Assignment page.
  2. The user enters their user name.
  3. The user enters the static password.

  4. The user enters the authenticator serial number.

    The authenticator serial number can be found on the back of the device.

  5. The user generates a one-time password with their Digipass authenticator.
  6. The user enters the one-time password in the Digipass Response field.
  7. If the user needs to specify a PIN, they enter it in the New PIN and Confirm New PIN fields.
  8. The user clicks Assign Authenticator.

Hardware Digipass authenticator self-assignment process (Digipass authenticator using Challenge/Response authentication)

  1. The user navigates to the Hardware Digipass Self-Assignment page.
  2. The user enters their user name.
  3. The user enters the static password.

  4. The user enters the authenticator serial number.

    The authenticator serial number can be found on the back of the device.

  5. The user clicks Assign Authenticator.
  6. The user enters the challenge displayed on-screen into their Digipass authenticator.
  7. The user enters the response from their Digipass authenticator in the Digipass Response field.
  8. The user clicks Assign Authenticator.