Digipass properties
For easier Digipass management, the Digipass properties are described in Digipass properties and Application properties.
Property | Description |
---|---|
Version |
This is the version of the static vector![]() |
Status |
The Digipass status can be one of the following:
|
Serial number | Serial number of the Digipass instance![]() |
Sequence number | Sequence number of the Digipass instance activated in multi-device mode. |
Password minimum length | Minimum length of the password to use for password protection. |
Password maximum length | Maximum length of the password to use for password protection. |
Weak password control | Indicates if weak passwords are rejected. |
Password check level |
Validation level applied to Digipass passwords. Possible values:
|
Password penalty | Penalty applied once the password penalty counter is reached: reset secret or generate invalid OTP. |
Password penalty initial value | Initial value of the penalty counter. |
Password penalty counter | Number of remaining wrong password entries before the password penalty is applied. |
Token derivation supported | Indicates if the Digipass authenticator supports the token derivation feature. |
High security | Indicates if the Digipass authenticator uses a single-length or double-length activation code. |
Activation code format | Indicates if the activation code![]() |
Activation code checksum | Indicates if the activation code uses a checksum. |
Number of cryptographic applications | Indicates the number of cryptographic applications supported by the Digipass authenticator. |
Digipass UTC time | Indicates the UTC time as retrieved by the Digipass authenticator from the host. |
Password Mandatory | Indicates if the Digipass authenticator must be protected by a user password. |
Password Protected | Indicates if the Digipass authenticator is protected by a user password. |
Secure Channel enabled | Indicates if the Digipass authenticator has been activated with a payload key. |
Device Type | Indicates the type of the platform used to activate the Digipass authenticator. |
Device ID Bits number | Indicates the number of bits from the platform fingerprint used in the device code. |