Text Tag Extraction

Text Tag Extraction enables integrators to automatically extract signatures and fields by placing Text Tags in a document. OneSpan Sign will analyze the uploaded document, and replace every text that matches the Text Tag pattern with the appropriate signature or field.

This section discusses:

• Text Tag Syntax
• Role Names in Text Tags
• Text Tag Types
• Text Tag Parameters
• Signer with Multiple Signatures

Best Practices for Using Text Tags

Here are some best practices that you should keep in mind when using text tags:

• When you have multiple attributes specified in text tags, try using comma to separate them, like below:

  • {{esl:Signer1:textfield:size(40,15),Maxlen(3)}}

  A more complicated example could look like:

  • {{esl_checkbox1:Signer1:checkbox:offset(0,-15),size(275,25),Maxlen(40)}

• Try using a smaller font for your text tags. This will save space and help you avoid affecting your content layout.
• Make sure your text tag is within one line.

Here is some sample code that incorporates these suggestions:

{{esl_optionA:Signer1:Radio:Group("Frequency"),Value("X"),size(10,10),offset(40,-8)}}
{{esl_optionB:Signer1:Radio:Group("Frequency"),Value(""),size(10,10),offset(40,-8)}}
{{esl_optionC:Signer1:Radio:Group("Frequency"),Value(""),size(10,10),offset(40,-8)}}

In this example, tags size are set to 1, and the regular text size is set to 12. Here is what you get after extracting to those fields:

For a copy of the Word document used in this example, click here.

If you are having problems putting your text tags in its proper location, try using the offset attribute. This is especially helpful when using a Microsoft Word document.

Text Tag Syntax

The following line illustrates the syntax of a Text Tag:

• {{Xesl[_fieldName]:roleName:fieldType[:parameter1,parameter2,...]}}

Field names are alphanumeric. They cannot contain special characters other than the underscore (_).

Note from this line that:

• The beginning and end of a Text Tag have double curly brackets. Curly brackets should not appear anywhere else in a Text Tag.
• The third character — the X — is placeholder for an optional character. That character can be either a question mark (?) or an asterisk (*). An asterisk indicates that an Input Field is required. A question mark indicates that an Input Field is optional. The question mark is the default value — i.e., if neither character is present, an Input Field will be optional. Example: {{*esl:Signer1:textfield}}
• fieldName is the name of the field that will be created by the Text Tag (a Signature, an Autofield, or an Input Field) — see Text Tag Types. If specified, this parameter will follow the “esl” prefix. Field names are alphanumeric. They cannot contain special characters other than the underscore (_). If you plan to retrieve the value entered during the Signer Experience, enter a unique name per field. Example: {{esl_SignerAutograph:Signer1:Signature}}
• roleName is the name of the role associated with the intended signer. To find the role name you need to use, see Role Names in Text Tags.
• fieldType is one of the field types described in Text Tag Types.
• parameter1 and parameter2 are parameters described in Text Tag Parameters.

Please be aware of the following:

• A Text Tag cannot appear on multiple lines.

• If a list of parameters is present, it must be a comma-separated list.

The following line illustrates the shortest valid syntax for a Text Tag:

{{esl:roleName:fieldType}}

Role Names in Text Tags

If you create a transaction using the OneSpan Sign web UI, the role name of the sender is always Owner.

If you create a Recipient" signer or a Group signer using OneSpan Sign, the role name of the signer is Signer#, where # starts at 1 and increases by one for each signer. The lowest available # is used for each new signer. Thus, if you delete the signer with role name Signer1 and then add a new signer, the new signer's role name will be Signer1.

If you create a placeholder signer, and name it Client, then Client will be the role name. Client will remain as the role name when that placeholder is later replaced with a specific recipient or group.

If you create a signer using the SDK, and assign a Custom ID to that signer, that ID will be the signer's role name. If you do not assign a Custom ID to the signer, one is generated for the signer using the same rules as when using the OneSpan Sign web UI.

Text Tag Types

There are three main types of Text Tags:

• Signatures
• Autofields
• Input Fields

Signatures

A particular Signature Text Tag can be any of the following field types:

• Signature — This Signature Block is Click-to-Sign. The signer's name will be stamped on the clicked block.
• Initials — This Signature Block is Click-to-Initial. The signer's initials will be stamped on the clicked block.
• Capture — The signer clicks this Signature Block, and draws their signature using a mouse or another input device. The signer can also choose to sign on a mobile device such as a smartphone if the sender has mobile capture enabled on their account. The drawing is then stamped on the Signature Block. Note that the use of a stylus is not supported in the Classic UI.
• Mobile_Capture — To e-sign this Signature Block, the signer will receive a link via email that redirects them to open the document on their mobile phone. They are then required to draw their signature using their finger or a stylus. The drawing of the signature is then stamped on the block. Note that the use of a stylus is not supported in the Classic UI.

Autofields

A particular Autofield Text Tag can be any of the following field types:

• SignerName — At the time of signing, the system automatically populates this field with the full name of the signer.
• SignerTitle — If the signer's title is available, the system automatically populates this field with that title at the time of signing. Otherwise, the field is left blank.
• SignerCompany — If the name of the signer's company is available, the system automatically populates this field with that name at the time of signing. Otherwise, the field is left blank.
• SigningDate — At the time of signing, the system automatically populates this field with the current date.

Input Fields

A particular Input Field Text Tag can be any of the following field types:

• TextField — This box accepts any text entered by the signer prior to signing.
• TextArea — This is similar to the TextField type, in that it provides an area where free-form text can be entered by signers. However, unlike Text Fields, it provides automatic wraparound. Each Text Area can accept up to 4000 characters.
• List — This drop-down menu provides the ability to select one of many options.
• Radio — Radio buttons also provide the ability to select one of many options.
• Checkbox — Prior to signing, the signer can either select or clear this simple check box.
• Label — The package sender can add a Label Field to embed text in a document. This is a read-only field with a value that will be simply stamped on the PDF. During the Signer Experience, the Label Field is displayed as non-editable text.

Text Tag Parameters

When building a Text Tag, the system uses the parameters described in the following table.

• Offset and Size are used for all three Text Tag types.

• The table's other parameters are used only for Input Field types.

• All parameters in the following table are optional.

If quotes are required in any parameter in the following table, you must use straight quotes. You cannot use curly quotes.

Parameter	Description	Examples
Offset	Offset (in points x 1.3) to be applied in positioning the field relative to the top left corner of the Text Tag If unspecified, the field will be inserted at the exact position of the Text Tag. Values can be positive or negative. To move the extracted field more to the right and lower, use positive offset values.	{{esl:Signer3:initials:offset(20,40)}} {{esl:Signer3:initials:offset(-20,-40)}}
Size	Size of the field (in points x 1.3). If unspecified, the system's default values will be used. Valid values must be positive.	{{esl:Signer1:capture:size(200,50)}}
Group	The radio group to which the field will belong If unspecified, the system will use its default radio group.	{{esl:Signer1:Radio:Group("MyGroup"),Value("X")}}
Options	The list of values available for a List field	{{esl_colour:signer1:list:options("Red", "Blue", "Green")}}
Value	The field's default value For Radio and Checkbox field types: (1) if no value is specified, the option will by default be deselected/unchecked; (2) to have the option selected/checked by default, the value “X” must be specified; (3) if any other value or the empty string is specified, the option will by default be deselected/unchecked.	{{esl:Signer1:label:value("This is a test label")}} {{esl_paymentMethod:signer1:textfield:value("Please enter your preferred payment method")}} {{esl:Signer1:checkbox:value("X")}}
Maxlen	The maximum permitted value for the field	{{esl_paymentMethod:signer1:textfield:Maxlen(200)}}
Signature	Name of the signature to which an autofield is bound	{{esl:Signer1:SigningDate:signature("signer1Sig2")}}

You can't add Custom Fields or Notary Fields via Text Tags.

Signer with Multiple Signatures

Suppose a document extraction uses Text Tags, and the document has more than one Signature Field for a given signer. This requires the specification of appropriate metadata, as the following sections explain:

• Signatures

• Autofields

• Input Fields

Signatures

The following metadata enable a document to have two signers, each with two Signature Fields:

Signer1: {{esl_signer1Sig1:Signer1:Signature}}

Signer1: {{esl_signer1Sig2:Signer1:Signature}}

Signer2: {{esl_signer2Sig1:Signer2:Signature}}

Signer2: {{esl_signer2Sig2:Signer2:Signature}}

Autofields

If any of the autofields SignerName, SignerTitle, SignerCompany, or SigningDate is bound to any of a signer’s multiple Signature Fields, the autofield’s metadata must be updated for the specific Signature Field to which it is bound (not necessarily bound to the signer’s first Signature Field).

The following metadata enable a signer’s multiple signatures to have different date stamps in the same document:

{{esl:Signer1:SigningDate:signature("signer1Sig2")}}

{{esl:Signer1:SigningDate:signature("signer1Sig1")}}

{{esl:Signer2:SigningDate:signature("signer2Sig1")}}

{{esl:Signer2:SigningDate:signature("signer2Sig2")}}

{{esl:Signer1:SignerName:signature("signer1Sig2")}}

{{esl:Signer1:SignerName:signature("signer1Sig1")}}

{{esl:Signer2:SignerName:signature("signer2Sig1")}}

{{esl:Signer2:SignerName:signature("signer2Sig2")}}

Input Fields

If an Input Field is bound to any of a signer’s multiple Signature Fields, that Input Field’s metadata must be updated for the specific Signature Field to which it is bound (not necessarily bound to the signer’s first Signature Field).

The following metadata enable a signer’s multiple signatures to have different Text Field and Text Area bindings in the same document:

{{esl:Signer1:TextField:signature("signer1Sig2")}}

{{esl:Signer1:TextField:signature("signer1Sig1")}}

{{esl:Signer2:TextField:signature("signer2Sig1")}}

{{esl:Signer2:TextField:signature("signer2Sig2")}}

{{esl:Signer1:TextArea:signature("signer1Sig2")}}

{{esl:Signer1:TextArea:signature("signer1Sig1")}}

{{esl:Signer2:TextArea:signature("signer2Sig1")}}

{{esl:Signer2:TextArea:signature("signer2Sig2")}}

Video Tutorial

Other Extraction Methods

You may also be interested in our other extraction types:

• Document Extraction
• Text Anchor Extraction
• Position Extraction

DocumentPackage pkg = PackageBuilder.newPackageNamed("Text Tag Example Package")
					.withStatus(PackageStatus.SENT)
					.withSigner(SignerBuilder.newSignerWithEmail("[email protected]")
					.withFirstName("John")
					.withLastName("Smith")
					.withCustomId("Signer1"))
					.withDocument(DocumentBuilder.newDocumentWithName("Sample Contract")
					.fromFile("C:/Users/hhaidary/Desktop/sample_contract.pdf")
					.withExtractionType(ExtractionType.TEXT_TAGS_ONLY)
					.enableExtraction())
				.build();

DocumentPackage pkg = PackageBuilder.NewPackageNamed("Text Tag Example Package")
					.WithStatus(DocumentPackageStatus.SENT)
					.WithSigner(SignerBuilder.NewSignerWithEmail("[email protected]")
					.WithFirstName("John")
					.WithLastName("Smith")
					.WithCustomId("Signer1"))
					.WithDocument(DocumentBuilder.NewDocumentNamed("Sample Contract")
					.FromFile("C:/Users/hhaidary/Desktop/sample_contract.pdf")
					.WithExtractionType(ExtractionType.TEXT_TAGS_ONLY)
					.EnableExtraction())
				.Build();

POST /api/packages

Accept: application/json
Content-Type: multipart/form-data
Authorization: Basic api_key

------WebKitFormBoundary1bNO60n7FqP5WO4t
					Content-Disposition: form-data; name="file"; filename="sample-contract.pdf"
					Content-Type: application/pdf
					%PDF-1.5
					%µµµµ
					1 0 obj
					<>>>
					endobj.... 
					------WebKitFormBoundary1bNO60n7FqP5WO4t
					Content-Disposition: form-data; name="payload"
					{
					"documents": [
					{
					"id": "sample-contract",
					"name": "Test Document",
					"extract": true,
					"extractionTypes":[
					"TEXT_TAGS"
					]
					}
					],
					"status": "DRAFT",
					"type": "PACKAGE",
					"roles": [
					{
					"id": "Signer1",
					"type": "SIGNER",
					"signers": [
					{
					"email": "[email protected]",
					"firstName": "John",
					"lastName": "Smith",
					"id": "Signer1"
					}
					],
					"name": "Signer1"
					}
					],
					"name": "Text Tags Example Package"
					}
				------WebKitFormBoundary1bNO60n7FqP5WO4t--

{
					"id": "9sKhW-h-qS9m6Ho3zRv3n2a-rkI="
				}

    	ESignLiveSDK sdk = new ESignLiveSDK();
         
					//Create package
					ESignLiveAPIObjects.Package_x pkg = new ESignLiveAPIObjects.Package_x();
					pkg.name = 'Test Text Tags - ' + Datetime.now().format();
					pkg.status = ESignLiveAPIObjects.PackageStatus.DRAFT;
        
					//Create Roles
					String roleId1 = 'Signer1';
					ESignLiveAPIObjects.Role role1 = new ESignLiveAPIObjects.Role();
					role1.signers = sdk.createRolesSigner('sigenr1_firstname', 'signer1_lastname', '[email protected]', 'CEO', 'ABC Bank');
					role1.id = roleId1;
					role1.name = roleId1;
					pkg.roles = new List<ESignLiveAPIObjects.Role>{role1};    //add role
        
					//Prepare Documents Blob
					String document1Name = 'Sample_Text_Tag';
					StaticResource sr = [SELECT Id, Body FROM StaticResource WHERE Name = 'test_text_tag' LIMIT 1];
					Map<String,Blob> documentBlobMap = new Map<String,Blob>();
					documentBlobMap.put(document1Name, sr.Body);
         
					//Create Document Metadata
					ESignLiveAPIObjects.Document document1 = new ESignLiveAPIObjects.Document();
					document1.name = document1Name;
					document1.id = document1Name;
					document1.extract = true;
					ESignLiveAPIObjects.Data data_x = new ESignLiveAPIObjects.Data();
					data_x.esl_doc_extract_type = '1';
					document1.data = data_x;
					pkg.documents = new List<ESignLiveAPIObjects.Document>{document1};    //add document
        
					//Send package One Step
					String packageId = sdk.createPackage(pkg,documentBlobMap);
				System.debug('PackageId: ' + packageId);